USUAL Surface
A standard covering of a laminate practically at any Manufacturer - a covering with an appreciable silky reflexion (analogue an is silky-matte varnish), smooth and equal, with small deepening-strokes obviously appreciable on a reflected light on a surface (imitation of “wood pores”), located on this surface in regular intervals and consequently, their arrangement is not connected in any way with drawing-pattern of the structure of the wood simulated by a laminate.

“NATURAL” Surface
The laminate surface one in one simulates the natural wood covered with a varnish (the Usual covering of a parquet board) - a surface equal and smooth, with an appreciable silky reflexion, with obviously appreciable “wood pores” on a reflected light which arrangement on a surface accurately repeats drawing-pattern of the structure of the wood simulated by a laminate.

TEXTURAL Surface
The laminate surface one in one simulates Textural (Брашт) a surface of natural wood - the surface has the small “relief” (roughnesses) created, obviously allocated on it, «wood fibres» and integrated “wood pores” which are repeated accurately by drawing-pattern of the structure of the wood simulated by a laminate. The laminated parquet, with the Textural surface «under a stone tile», one in one simulates the natural roughly processed stone.

The RELIEF Surface
A laminate surface has the small “relief” (roughnesses) created by thin smooth longitudinal strips, going along all length of the panel of a laminate which are not connected in any way with drawing-pattern of the structure of the wood simulated by a laminate. The laminated parquet, with the Relief surface «under a ceramic tile», one in one simulates a natural ceramic tile with a “is rough-rough” surface.

“COUNTRY” the Surface
The laminate surface has large and smooth “relief” (roughnesses), as at roughly processed manually, “on-trinkets”, wood. These “man-made” roughnesses, naturally, are not connected in any way with drawing-pattern of the structure of wood.

The “MADE old” Surface
A laminate surface has the large and smooth “relief” (roughnesses) repeating drawing-pattern of the structure of wood, and appreciable «сколы wood». Such surface turns out, when boards from a natural tree very long time have lain open-air and their surface «изъели» a moisture, light, air and time. Then these boards have cleaned a rough metal scraper, have varnished or oil and have made of them floors indoors.

«A tree under OIL»
The laminate surface very accurately simulates the wood covered with natural oil - a surface equal, without “wood pores”, very smooth both pleasant to the touch and matte (absolutely without a reflexion) - practically same, as at the tree which has absorbed in oil.

Is silky-GLOSSY and GLOSSY Surfaces
The laminate surface simulates the wood covered with brilliant varnishes, with much strong reflexion of the surface.
Some Manufacturers of the laminated parquet (laminate) have surfaces from a combination of 2 Kinds of surfaces set forth above that is acknowledgment of high adaptability to manufacture at them on manufacture.